Yorkville Flowise Right Height EL Toilet

Model #: 2878.100, 4142.100, 4142.601, 4142.801, 4142.901, 3703.001, 7381047-200, 7381049-200, 735133-400, 735133-401

  • High efficiency ultra low consumption (1.1gpf/4.2Lpf), utilizes 31% less water
  • Meets EPA WaterSense® criteria
  • Floor-mounted, back-outlet toilet combination bowl and tank less seat
  • Pressure-assisted siphon jet action
  • EverClean® Surface
  • Elongated 16-1/8" high bowl for accessible applications
  • Fully glazed 2-1/8" trapway
  • 10" x 12" water surface area
  • Close-coupled flushometer tank
  • Chrome metal trip lever
  • Speed Connect® tank/bowl coupling system
  • 4 bolt caps
  • Sanitary bar on bowl

Nominal Dimensions:
29-3/4" x 20-1/2" x 30-3/4"
(752 x 516 x 780mm)

Recommended working pressure range 25 psi - 80 psi

zoom
Yorkville Flowise Right Height EL Toilet shown in White (020)
zoom
Yorkville Flowise Right Height EL Toilet shown in Bone (021)
zoom
Yorkville Flowise Right Height EL Toilet shown in Linen (222)
zoom
Yorkville Flowise Right Height EL Toilet Alternate View
zoom
Yorkville Flowise Right Height EL Toilet Alternate View
Yorkville Flowise Right Height EL Toilet Alternate View Yorkville Flowise Right Height EL Toilet Alternate View


Downloads &
Related Links

Model Numbers

Main Fixtures

  • 2878.100 - Yorkville Right Height® (1.1 gpf/4.2 Lpf) FloWise®
    Estimated List Price: $835 - $1044
    • High efficiency ultra low consumption (1.1 gpf/4.2 Lpf) utilizes 31% less water
    • Meets EPA WaterSense criteria

Add. Fixture/Component Parts

  • 4142.100 - 1.1 gpf Flushometer tank complete with coupling components
    Estimated List Price: $376 - $471
  • 4142.601 - 1.1 gpf tank for locking device
    Estimated List Price: $409 - $511
  • 4142.801 - 1.1 gpf Tank with right-hand trip lever
    Estimated List Price: $382 - $477
  • 4142.901 - 1.1 gpf Tank with right-hand trip lever and locking device
    Estimated List Price: $414 - $518
  • 3703.001 - Elongated 16-1/8" high bowl with four (4) bolt caps and two (2) floor screws
    Estimated List Price: $459 - $573
    • For use with both 1.6 gpf and 1.1 gpf tanks
  • 7381047-200 - Left-hand trip lever assembly
    Estimated List Price: $61
    • Comes in Chrome (002)
  • 7381049-200 - Right-Hand trip lever assembly
    Estimated List Price: $63
    • Comes in Chrome (002)
  • 735133-400 - Tank cover
    Estimated List Price: $53 - $66
  • 735133-401 - Tank cover for locking device
    Estimated List Price: $53 - $66

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team

6 Questions | 6 Answers
Displaying questions 1-6

  • Q:

    HOW MUCH WALL THICKNESS DO I NEED TO PUT THE SANITARY ELBOW IN FOR A BACK OUTLET WATER CLOSET?
    Asked on 11/22/2011 by sam from Dublin Ohio

    1 answer

    • CUSTOMER CARE

      A:

      This will depend on the size and configuration of the elbow. It is suggested that you check with your local codes. Typically the wall can be a standard 2x4.

      Answered on 11/23/2011 by Anonymous

  • Q:

    After installation water was noticed in bottom of bowl. Is this normal? With other installations of similar units this is a sign of a problem.
    Asked on 2/25/2011 by Hector from New City NY

    1 answer

    • CUSTOMER CARE

      A:

      Check to make sure the seal is on correctly

      Answered on 5/20/2011 by Anonymous

  • Q:

    What flange or fitting is necessary to install this toilet?
    Asked on 1/28/2011 by Chris from Franklin, IN

    1 answer

    • CUSTOMER CARE

      A:

      This toilet is installed on to a standard closet flange.

      Answered on 5/14/2011 by Anonymous

  • Q:

    What toilet seat is compatible with this toilet that has an open front for a commercial use?
    Asked on 11/3/2010 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      American Standard would like to sincerely apologize for not responding to your question posted on “Ask an Expert”; there was an internal systems error that we uncovered that affected a group of inquiries which has been corrected; and again we apologize. Since it has been several months since you posted your question, we have set up a special email answer desk to help quickly solve any outstanding questions or inquiries that you may still have.

      Please email any questions to AskAnExpert@americanstandard.com and we will be sure to get back to you as quickly as possible.

      Sincerely,
      American Standard Brands

      Answered on 6/1/2011 by Anonymous

  • Q:

    Why do our 4 new toilets keep running after flushing?
    Asked on 9/2/2010 by jane from Ontario

    1 answer

    • CUSTOMER CARE

      A:

      The recommended static pressure range by code is 20 PSI to 125
      PSI. If sufficient supply pressure has been verified and the toilet
      continues to run, the following steps may be required:
      Step 1. Make sure the water supply valve is fully open.
      Step 2. Check the flush control valve for any leaks and make sure the
      connections are also tight. If water is leaking from the flush control valve
      then the flush control valve should be replaced (EcoFlush Part Number
      B8106-06, covered by factory warranty)
      Step 3. Check to ensure that there are no leaks in the supply line and
      connector lines, which would prevent the proper function of the system.
      Step 4. Check the Flush Valve Cartridge (FVC) assembly for proper
      installation and use the water test to check for air leak around the top of the
      flush valve cartridge. Proceed as follows: If the FVC has an air leak you
      need to check the flush valve and o-ring seal.
      Step 5. Turn off the water supply and flush the toilet to relieve any pressure.
      Remove the Flush Valve Cartridge (FVC) Assembly using the Flush Valve
      tool. To remove the Flush Valve Cartridge Assembly, disconnect the 3 lines
      the supply line from the upper supply assembly and the two lines from the
      Flush Valve Cartridge(FVC). You may disconnect these lines by moving
      the tabs into the unlocked position and pulling gently on the lines.
      Disconnect Upper Supply line to the FVC by loosening the nut that
      connects the top of the FVC to the Upper Supply Assembly.
      Step 6. Using the tool provided engage the interlocking teeth and rotate the
      FVC counter clockwise 1/4 turn. Then lift the FVC up removing it from the
      vessel.
      Step 7. Inspect the FVC large o-ring at the top of cartridge and also check
      the lower o-ring for damage or if it is properly seated. NEVER USE ANY
      LUBRICANTS ON ANY OF THE PARTS OF THE ECOFLUSH AS THIS
      WILL VOID THE WARRANTY AND CAUSE DAMAGE TO THE PARTS.

      Answered on 9/20/2010 by Anonymous

  • Q:

    Don't know model number no flapper for flush mechanism. Tube with lifting device inside in 2 stage flushing method. Tube lifts with chain from flush handle and falls to seal flush opening when tank empty.. Bottom of tube leaks around gasket into drain causing fill valve to activate frequently. Can't find flush tube or similar cinfiguration in parts lists.
    Asked on 8/14/2010 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      You inquiry will require more research. Please contact us at 1-800-442-1902 for further assistance.

      Answered on 8/23/2010 by Anonymous
Displaying questions 1-6

Do you have a question about this product? 

Customer Resource Center
features and benefits

If American Standard is your business, then the Customer Resource Center is where you will find the tools and resources required to make it a success. Here you will find images, graphics, sales support tools, promotional merchandise, and advertising materials, and more.

We’re sorry, we are not offering any repair parts for this product through our online Repair Parts store at this time.

MSRP: $835 - $1,044

Style

Casual
Learn more about this style

Features

Belongs to the

Flowise Collection
Flowise Collection
Learn More

Related Searches

Page Tools

Product Information

This page was printed from: http://www.americanstandard.com

Yorkville Flowise Right Height EL Toilet

MSRP: $835 - $1,044

  • High efficiency ultra low consumption (1.1gpf/4.2Lpf), utilizes 31% less water
  • Meets EPA WaterSense® criteria
  • Floor-mounted, back-outlet toilet combination bowl and tank less seat
  • Pressure-assisted siphon jet action
  • EverClean® Surface
  • Elongated 16-1/8" high bowl for accessible applications
  • Fully glazed 2-1/8" trapway
  • 10" x 12" water surface area
  • Close-coupled flushometer tank
  • Chrome metal trip lever
  • Speed Connect® tank/bowl coupling system
  • 4 bolt caps
  • Sanitary bar on bowl

    Nominal Dimensions:
    29-3/4" x 20-1/2" x 30-3/4"
    (752 x 516 x 780mm)

    Recommended working pressure range 25 psi - 80 psi

COLORS:

  • White (020)
  • Bone (021)
  • Linen (222)

FEATURES:

  		•  ADA Compliant
  		• EverClean™ Surface
  		• Right Height
  		• Water Efficient
  		• WaterSense® Certified

MODEL NUMBERS:

Main Fixtures

2878.100 - Yorkville Right Height® (1.1 gpf/4.2 Lpf) FloWise®
Estimated List Price: $835 - $1044

  • High efficiency ultra low consumption (1.1 gpf/4.2 Lpf) utilizes 31% less water
  • Meets EPA WaterSense criteria

Add. Fixture/Component Parts

4142.100 - 1.1 gpf Flushometer tank complete with coupling components
Estimated List Price: $376 - $471

4142.601 - 1.1 gpf tank for locking device
Estimated List Price: $409 - $511

4142.801 - 1.1 gpf Tank with right-hand trip lever
Estimated List Price: $382 - $477

4142.901 - 1.1 gpf Tank with right-hand trip lever and locking device
Estimated List Price: $414 - $518

3703.001 - Elongated 16-1/8" high bowl with four (4) bolt caps and two (2) floor screws
Estimated List Price: $459 - $573

  • For use with both 1.6 gpf and 1.1 gpf tanks

7381047-200 - Left-hand trip lever assembly
Estimated List Price: $61

  • Comes in Chrome (002)

7381049-200 - Right-Hand trip lever assembly
Estimated List Price: $63

  • Comes in Chrome (002)

735133-400 - Tank cover
Estimated List Price: $53 - $66

735133-401 - Tank cover for locking device
Estimated List Price: $53 - $66

*List prices are presented for reference purposes only. Any final purchase prices must be obtained at the time of purchase, directly from your desired dealer or retailer.

COMPLEMENTARY:

  • Selectronic 0.5 GPM Proximity Lavatory Faucet

    http://www.americanstandard-us.com/products/productDetail.aspx?id=2152

  • Ravenna Wall-Mount Sink

    http://www.americanstandard-us.com/products/productDetail.aspx?id=1244

  • Washbrook 0.125 GPF Urinal with Selectronic FV

    http://www.americanstandard-us.com/products/productDetail.aspx?id=2353

SIMILAR:

  • Yorkville Right Height Pressure Assisted EL Toilet

    http://www.americanstandard-us.com/products/productDetail.aspx?id=2665

  • Glenwall Pressure Assisted Wall-Mounted Toilet

    http://www.americanstandard-us.com/products/productDetail.aspx?id=901

  • Yorkville Flowise Pressure Assisted EL Toilet

    http://www.americanstandard-us.com/products/productDetail.aspx?id=2664

Customers considering this product should also consider these products:

SimilarCollection

©2012 AMERICAN STANDARD BRANDS
PRIVACY POLICY |  SITEMAP



Login

password

Register

Sign up to enjoy the benefits of registration immediately.

  • Save your favorite products to your personal wish list that never expires.
  • Get quick access to warranty programs, install instructions, product specifications and repair part sheets.
  • Add favorite dealers to your profile for quick reference to your favorite places to buy.
Stay Social:
youtubeSubscribe
Follow Me on PinterestFollow Us