Guest Account

Home

FloWise Dual Flush Elongated Toilet

Model #: 2479.216, 2479.516, 4035.516, 735130-400, 7381034-200, 4035.216, 3067.216

(4.2)

Conserve water and save money with every flush.
Our innovative new Dual Flush FloWise® toilets allow you to save water while providing you with the flexibility to choose between a mere 0.8 gallon flush or a standard 1.6 gallon flush. Featuring a two button actuator on top of the tank, the Dual Flush toilet gives you to ability to choose the most appropriate water saving flush every time.

Wash down toilet

Combination bowl and tank

High efficiency, low consumption
Full Flush 1.6gpf/6.0Lpf
Partial Flush 0.8gpf/3.0Lpf, utilizes 33% less water

Meets EPA WaterSense® criteria

12" (305mm) rough-in

Chrome-plated top mounted push button actuator

Concealed trapway bowl

Sanitary Dam on bowl

Fully glazed 2-1/4" trapway

Internal trapway area fully glazed

100% factory flush tested

2 color-matched bolt caps

2 year warranty

Includes color-matched solid plastic seat & cover

Nominal Dimensions -
Length x Width x Height:
31-1/4" x 17" x 30-1/8"
(794 x 432 x 765mm)

FloWise Dual Flush Elongated Toilet shown in White (020)

FloWise Dual Flush Elongated Toilet Alternate View

Downloads &
Related Links

Reviews

English

Downloads

Français Canadien

Téléchargements

Instructions d'installation

Español

Descargas

Instrucciones de instalación

Apps

Model Numbers

Main Fixtures

2479.216 - FloWise® Dual Flush Elongated Toilet
Estimated List Price: $398
- Includes color-matched solid plastic seat & cover
- Nominal Dimensions: 31-1/4" x 17" x 30-1/8"
2479.516 - FloWise® Dual Flush Elongated Toilet
Estimated List Price: $442
- Same as 2479.216, except with tank with Aquagard liner

Add. Fixture/Component Parts

4035.516 - 12" Rough-In Tank with Aquaguard liner
Estimated List Price: $227
735130-400 - Tank Cover
Estimated List Price: $51
7381034-200 - Tank Cover Locking Device
Estimated List Price: $18

Required Components

4035.216 - 12" Rough-In Tank
Estimated List Price: $183
3067.216 - Elongated bowl with bolt caps and seat
Estimated List Price: $215

REVIEW SNAPSHOT®

by PowerReviews

American Standard FloWise Dual Flush Elongated Toilet

4.2

(based on 13 reviews)

100%

of respondents would recommend this to a friend.

Pros

Efficient flush (12)
Easy installation (10)
Water efficient (9)
Sleek design (8)
Good value (7)

Cons

Best Uses

Large bathroom (7)
Master bathroom (7)
Guest bathroom (6)
Small bathroom (4)

- Reviewer Profile:
- Midrange shopper (7), Budget shopper (5)

REVIEWS

Reviewed by 13 customers

Sort by

Displaying reviews 1-5

Previous | Next »

10/2/2011

3.0

Too early to to make comments

By George

from Brampton, ontario

About Me Budget Shopper

Pros

Easy Installation
Efficient Flush
Good Value
Quiet Flush

Cons

Too early to comment

Best Uses

Guest Bathroom
Master Bathroom

Comments about American Standard FloWise Dual Flush Elongated Toilet:

Dual flush
Quite
Elegant design

9/25/2011

4.0

I would buy this product again

By Moe

from Canada

About Me Midrange Shopper

Pros

Easy Installation
Efficient Flush

Cons

Best Uses

Guest Bathroom
Master Bathroom

Comments about American Standard FloWise Dual Flush Elongated Toilet:

The product has a good record.

8/16/2011

5.0

Flo wise dual flush-good value

By Brian

from Saskatchewan, Canada

About Me Budget Shopper

Pros

Easy Installation
Efficient Flush
Excellent flushing action
Good Value
Quiet Flush
Self closing seat
Sleek Design
Very quiet running
Water Efficient

Cons

Best Uses

Large Bathroom
Use in larger bathroom

Comments about American Standard FloWise Dual Flush Elongated Toilet:

It's a great flush toilet for those interesting in water conservation and a good flushing action. One needs a little more space if one chooses the elongated design.

8/9/2011

5.0

Flo Wise Dual Flush Toilet

By Paul the Home Repair Guru

from Mississauga, Ontario

About Me Midrange Shopper

Pros

Efficient Flush
Good Value
Water Efficient

Cons

Best Uses

Guest Bathroom
Large Bathroom
Master Bathroom

Comments about American Standard FloWise Dual Flush Elongated Toilet:

I am very pleased with this product. Great quality for reasonable price!

8/8/2011

4.0

I like the good, strong flush

By AT

from Toronto, ON

About Me Midrange Shopper

Pros

Efficient Flush
Quiet Flush
Sleek Design
Water Efficient

Cons

About one inch too tall

Best Uses

Master Bathroom

Comments about American Standard FloWise Dual Flush Elongated Toilet:

I like the clean sides design and we got the slow-down toilet seat all at a sale price.

Displaying reviews 1-5

Previous | Next »

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team

13 Questions | 14 Answers

Displaying questions 1-10Previous | Next »

Q:
why is the water level in the bowl so low
Asked on 12/20/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  It is normal now with the low water consumption toilets for the water level to be low in the bowl. You may have a water restrictor which you can remove. Remove the refill tube from the fill valve and inside the hole may be a small plastic piece that can be removed. It is a water restrictor. If it is not there there is no way to add more water.
  Answered on 12/21/2011 by Anonymous
Q:
I bought this toilet about 2 months ago. It worked fine at first but now continues to run after flushing. I have tried adjusting it per the manual and it will help for a couple of flushes and then the problem happens again. Any suggestions?
Asked on 11/5/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  You may need to replace the fill valve, please contact customer service at 1-800-442-1902 for information on getting a replacement fill valve.
  Answered on 11/6/2011 by Anonymous
Q:
The left actuator button sticks down. The valve is ok, it's the button in the lid that sticks. How can I remedy this?
Asked on 8/6/2011 by James from Northwest Florida
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  It may be necessary to replce the actuator button. The part number is 7381003-XXX0A.
  Answered on 8/16/2011 by Anonymous
Q:
have two of these toilets, but one of them for some reason the water control unit goes off every two minutes. What needs to be done?
Asked on 7/9/2011 by Anonymous from Atlanta GA
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  The water must be leaking through the flush valve seal if the water control is kicking on, call into the warranty / technical line at 1-800-442-1902 option 1-4-2 to receive replacements.
  Answered on 7/12/2011 by Anonymous
Q:
I just installed a elongated dual flush comode. It seems that for some reason the float is sticking up when it is flushed not allowing water to come in and fill the tank. Any ideas on what to do to correct this problem.
Asked on 5/16/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Please call into our customer care line to have a new fill valve sent out to you. Our number is -800-442-1902, prompts 1 and 1. One of our reps will be happy to help you.
  Answered on 5/17/2011 by Anonymous
Q:
Hi,
Which toilet would you recommaned that have both flow design(smooth on the sides -trap not seen -like flow wise series) and also the largest water area inside (when you look down) ?

Thanks
Paul
Asked on 4/5/2011 by Anonymous from south Florida
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  View the Concealed trapway Cadet 3.
  Answered on 5/26/2011 by Anonymous
Q:
My AS 4035 has been working fine for about a year but now water is leaking into the bowl.
How can I fix this?
Asked on 3/22/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Thank you for your questions on your toilet. The mysterious draining bowl can be checked by doing certain test. If you take a 3-gallon bucket of water, and slowly add the water, until the water level stays the same, mark the inside of your bowl with a grease pencil or crayon. Check the tank in an hour and see where the level of the water is. You may reach a place where the water may settle about 1/4"-1/2" from the mark, and that is fine. If the water has gone down significantly, then there may be a problem with a leak in the bowl somewhere.
  
  Be sure that you do not flush any other toilets in the house during the same time. You may have another toilet that is causing the problem by stealing the water from this toilet. Very often we see that the water lines must have a separate drain into the outlet drain when installing a high-pressure toilet. The venting required for a high-pressure toilet will cause extra suction to drain the bowl of another toilet in the house. Back to back installations of toilets require a "Y" connection to prevent this problem. In two-story houses, the pressure assist toilet should be installed with a separate drain line leading to the common drain, or have a larger pipe to prevent the suction from taking the water from the other toilet. Also in some flat-level installations, if the two lines meet at a 90 degree drain, and not a "Y" drain, the one toilet will suck the water from the other toilet.
  
  If this is not the case, and the bowl drains on its own, you may have a leak in the bowl. This is a problem that cannot be diagnosed over E-mail, but you will need to talk to a customer service representative. You may call Technical Customer Service at 1-800-442-1902, and then press option 1 for Consumer, then option 1 for Technical Support. Our office is open Monday – Friday from 8:00 a.m. – 6:00 p.m., EST and Saturday 8am - 6pm. Be prepared to have your model number, color of your model, month/year of purchase, name, street address and phone number. Any of our qualified technical customer service representatives will be glad to assist you. (Canadian customers should call 1-800-387-0369 or 1-905-306-1093 in Toronto, Monday – Friday, 8:00 a.m. to 5:00 p.m., EST.)
  Answered on 5/5/2011 by Anonymous
Q:
Has there been any issues with regards to the toilet seat not aligning properly with the rim of the toilet? I bought two of these toilets about a year ago and the seat keeps on sliding from side to side no matter how tight I tighten the screws. It seems as the contact points of the seat itself do not align with the rim.
Asked on 3/13/2011 by Ed from Richmond Hill, Ontario, Canada
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  You will need to contact our Customer Service Team you will be asked for photos of the seat sitting on the bowl so we can see if the problem is with the seat or the rim holes. Please call us at 1-800-442-1902 dial prompt 1 & 1.
  Answered on 5/5/2011 by Anonymous
Q:
The plastic round tabs in the cartridge that slide in the toilet seat break frequently. Do I need to replace the entire cartridge or just get new round plastic pieces? Where can I get these parts?
Asked on 2/13/2011 by philly from woodbrige, canada
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  It is very unclear what it is you are referring to. Please visit the link below for a complete repair parts diagram to assist you in determining what it is that you require to resolve your issue.
  
  http://www.americanstandard-us.com/assets/documents/amstd/install/Install_2037.pdf
  Answered on 2/16/2011 by Anonymous
Q:
After one year, my flush valve has started rapidly leaking water into the bowl. How can I fix this?
Asked on 11/27/2010 by Anonymous
Know the answer? Answer this question
2 answers
- A:
  Clean valve
  Answered on 2/9/2011 by haywire from NS canada
- CUSTOMER CARE
  
  A:
  Please call 1-800-442-1902 options 1-4-2 to order repair parts to resolve your issue.
  Answered on 12/28/2010 by Anonymous

Displaying questions 1-10Previous | Next »

Do you have a question about this product?

Customer Resource Center
features and benefits

If American Standard is your business, then the Customer Resource Center is where you will find the tools and resources required to make it a success. Here you will find images, graphics, sales support tools, promotional merchandise, and advertising materials, and more.

We’re sorry, we are not offering any repair parts for this product through our online Repair Parts store at this time.

MSRP: $398 - $442

Find purchase options from our dealer locator

Style

Casual

Learn more about this style

Features

Belongs to the

Flowise Collection

Learn More

Product Information

This page was printed from: http://www.americanstandard.com

FloWise Dual Flush Elongated Toilet

MSRP: $398 - $442

Conserve water and save money with every flush.
Our innovative new Dual Flush FloWise® toilets allow you to save water while providing you with the flexibility to choose between a mere 0.8 gallon flush or a standard 1.6 gallon flush. Featuring a two button actuator on top of the tank, the Dual Flush toilet gives you to ability to choose the most appropriate water saving flush every time.

Wash down toilet

Combination bowl and tank

High efficiency, low consumption
Full Flush 1.6gpf/6.0Lpf
Partial Flush 0.8gpf/3.0Lpf, utilizes 33% less water

Meets EPA WaterSense® criteria

12" (305mm) rough-in

Chrome-plated top mounted push button actuator

Concealed trapway bowl

Sanitary Dam on bowl

Fully glazed 2-1/4" trapway

Internal trapway area fully glazed

100% factory flush tested

2 color-matched bolt caps

2 year warranty

Includes color-matched solid plastic seat & cover

Nominal Dimensions -
Length x Width x Height:
31-1/4" x 17" x 30-1/8"
(794 x 432 x 765mm)

COLORS:

White (020)

FEATURES:

Toilet Performance - Best - MAP Score between 800-1000g

Toilet Shape - Elongated

Water Efficient

WaterSense® Certified